Search by Application:

110 Amp Hitachi-Type Alternator For Nissan (See All)

Ref #204-316 Karam #13639
Click to Enlarge...
This photo is for identification purposes only.
It does not necessarily represent the new or
re-manufactured part that will be shipped.
  • Alternator
  • Hitachi
  • 12Volt
  • Cw
  • 110 Amp
  • 0
  • S6
  • I/R

Call Us

Toll-free 1-888-515-2726

Email Us

Mention Karam #13639
or Details Ref #204-316

Short Notes

NISSAN MAXIMA, INFINITI I30 1995-99
6-GROOVE PULLEY, 62MM OD, 17MM ID
SEE: 204-317 (125 AMP VERSION)

Long Notes

This is a 110A Version of the 125A 13612. Both Units Fit the Nissan Maxima and Infiniti I30. Nissan Has Recalled the 1997 (2/97 Thru 2/98) Maxima and Infiniti I30 With One or Both of the Alternators Used (Recall #02V171000 - See 13612) Because "One of the Diodes Used in the Alternator May Have Been Damaged When Built. This Can Eventually Result in Failure of the Diode and an Electrical Short Which Could Melt the Plastic Housing". The Recall Notice Goes on to Say That a Fire Could Result "If the Combustible Gas Emitted By the Melting Plastic Does Not Disperse (Properly)". Also, it is Critical That the Stators and Rear Housings on the 13612 and 13639 are NOT Mixed Up, as the Stator on the 13612 is Wider Than the 13639, and There is a Different Bushing on the Rear Bottom Mounting Hole to Compensate, so the Distance Between the Inside of the Front and Inside of the Bushing (Which is Basically the Length of the Mounting Spool in the Vehicle) is 79mm. If the Stator and Rear Housings are Mixed Up at All, Then the Spacing May Vary, and There Could Be a Problem With Housings Breaking When the Units are Installed.
ApplicationsParts BreakdownReferences
Make, Model and Submodel Engine Year(s)
NISSAN MAXIMA 3.0L
1995, 1996, 1997